tiktok-1 tiktok-1-1 tiktok-1-2
0
Opening hours:
Mon–Fri, 09:00–17:00
Call us:
+38(067)55-02-555
0
Nylatron® GSM PA6
screenshot_4

Nylatron® GSM PA6 — cast polyamide 6 with additive molybdenum disulfide (MoS2), which uniformly rozpodilena in matrix material. MoS2 diie as tverdyi lubricantsnyi filler, that reduces coefficient of friction and significantly increases wear resistance in sliding units bez external lubricant. Na difference from standard PA6, GSM retains mechanical strength and practically ne changeuie sizes at change humidity.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Gray
Material type
PA6 (Polyamide 6), cast
Temperature range
From -30 to +90 °C
Filler
Molybdenum disulfide MoS2
Density
1.16 g/cm3
Elastic modulusus
3400 MPa
Tensile yield strength
80 MPa
Vodoabsorption (23°C)
6,70%
Standards
ISO 11357-1/-3, ASTM D3418, ASTM E-831, ISO 75-1/-2, ASTM D648, UL 94, ISO 4589-1/-2, ISO 527-1/-2, ASTM D638, ASTM D732, ISO 604, ASTM D695, ISO 179-1/1eU, ISO 179-1/1eA, ASTM D256, ISO 178, ASTM D790, ISO 2039-2, ASTM D785, ISO 868, ASTM D2240, IEC 60243-1, ASTM D149, IEC 62631-3-1, ASTM D257, ANSI/ESD STM 11.11, IEC 62631-2-1, ASTM D150, ISO 1183-1, ASTM D792, ISO 62, ASTM D570, ISO 7148-2, QTM 55010, QTM 55007
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

Nylatron® GSM PA6

Brand: Nylatron
Article: 3005
In stock

Nylatron® GSM PA6 – Nylatron® GSM PA6 – polyamide PA6 with additive molybdenum disulfide (MoS2). Zabezpechuie improved oporni properties and wear resistance bez significant change mekhanichnykh characteristics compared withi standard PA6.

Plastic shape:
Starting price from
/m²
Please note. The indicated price is per 1 m² of material. The actual cost depends on the selected plastic shape (sheet, rod or tube), dimensions/sizes and product cutting. After the parameters are specified, we will make an accurate calculation and confirm price in commercial offer.

Key parameters of plastic

Product form Rod, Sheet, Tube
Scope of application Agriculture and agricultural machinery, Food and packaging industry (technological units), Lifting and handling equipment, mechanical engineering, Mining and quarrying industry
Material Polyamide PA6
Temperature range From -30 to +90 °С
Product form Rod, Sheet, Tube
Scope of application Agriculture and agricultural machinery, Food and packaging industry (technological units), Lifting and handling equipment, mechanical engineering, Mining and quarrying industry
Material Polyamide PA6
Temperature range From -30 to +90 °С

Nylatron® GSM PA6 — cast polyamide 6 with additive molybdenum disulfide (MoS2), which uniformly rozpodilena in matrix material. MoS2 diie as tverdyi lubricantsnyi filler, that reduces coefficient of friction and significantly increases wear resistance in sliding units bez external lubricant. Na difference from standard PA6, GSM retains mechanical strength and practically ne changeuie sizes at change humidity.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Gray
Material type
PA6 (Polyamide 6), cast
Temperature range
From -30 to +90 °C
Filler
Molybdenum disulfide MoS2
Density
1.16 g/cm3
Elastic modulusus
3400 MPa
Tensile yield strength
80 MPa
Vodoabsorption (23°C)
6,70%
Standards
ISO 11357-1/-3, ASTM D3418, ASTM E-831, ISO 75-1/-2, ASTM D648, UL 94, ISO 4589-1/-2, ISO 527-1/-2, ASTM D638, ASTM D732, ISO 604, ASTM D695, ISO 179-1/1eU, ISO 179-1/1eA, ASTM D256, ISO 178, ASTM D790, ISO 2039-2, ASTM D785, ISO 868, ASTM D2240, IEC 60243-1, ASTM D149, IEC 62631-3-1, ASTM D257, ANSI/ESD STM 11.11, IEC 62631-2-1, ASTM D150, ISO 1183-1, ASTM D792, ISO 62, ASTM D570, ISO 7148-2, QTM 55010, QTM 55007
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

Related content

dsc_0134

Ketron® HPV PEEK

Ketron® HPV PEEK – Ketron® HPV PEEK – PEEK з вбудованими мастилами (графіт, ПТФЕ, вуглець) для оптимальних трибологічних характеристик. Ідеальний для підшипників і деталей ковзання при підвищених температурах без зовнішнього змащення.
More details
photo_2020-06-10_17-17-09-e1599739721214

Ertalyte® PET

Ertalyte® PET – Ertalyte® PET – unreinforced, semi-crystalline thermoplastic based on polyethylene terephthalate. Kharakteryzuietsia excellent dimensional stability, chemical resistance and wear resistance for precision parts with tight tolerances.
More details
photo_2020-06-10_17-17-11-e1599739807675

Ertalyte® TX FG PET-P

Ertalyte® TX PET – Ertalyte® TX – thermoplastic polyester PET with internal lubricant for improved wear resistance and khimichnoi inertnosti. Ideal for bearings and sliding parts, that operate without external lubrication.
More details
dsc_0143

Ketron® 1000 PEEK

Ketron® 1000 PEEK – Ketron® 1000 PEEK – provides the highest strength and impact toughness among all grades Ketron. Dostupnyi in natural and black colors for the most demanding applications at extreme temperatures and chemical load.
More details
dsc_0140-1

Ketron® CA30 PEEK

Ketron® CA30 PEEK – Ketron® CA30 PEEK – PEEK reinforced with 30% carbon fibers. Zabezpechuie vykliuchnu stiffness, heat resistance and chemical inertness. Ideal material for labyrinth seals compressors and parts aerospace industry.
More details
photo_2020-06-10_17-16-55-e1599739206909

Ketron® GF30 PEEK

Ketron® GF30 PEEK – Ketron® GF30 PEEK – PEEK reinforced with 30% glass fiber. Combines exceptional heat resistance PEEK with improved stiffness and dimensional stability for precision parts in extreme conditions.
More details
dsc_0136

Nylatron® NSM PA6

Nylatron® NSM PA6 – Nylatron® NSM PA6 – polyamide PA6 with tverdymy lubricating additives NSM, that makes material samozmashchuvalnym. Znachno reduces friction and increases wear resistance, is ideal for moving parts without external lubrication.
More details
dsc_0172

Nylatron® SLG PA6

Nylatron® SLG PA6 – Nylatron® SLG PA6 – specially developed for unlubricated, highly loaded and slow-moving parts. Thanks to unique composition provides lower costs on maintenance and longer service life compared with standard cast nylonamy.
More details
Calculation and consultation on plastic
We will help you choose plastic, calculate the dimensions and conditions for your project