tiktok-1 tiktok-1-1 tiktok-1-2
0
Opening hours:
Mon–Fri, 09:00–17:00
Call us:
+38(067)55-02-555
0
Ertalon® 6 XAU+ PA6
dsc_0110

Ertalon® 6 XAU+ PA6 — heat-stabilized cast polyamide 6 increased temperature resistance. Thanks to very dense krystalichnii structure and heat stabilizers material retains mechanical strength and heometrychni sizes at long-term vplyvi elevated temperatur — to 105 °C in continuous mode. Porivniano with ordinary extruded or cast PA6 demonstrates significantly lower creep and higher resistance deshapevanniu at nahrivanni.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Black
Material type
PA6 (Polyamide 6), cast heat-stabilized
Temperature range
From -30 to +105 °C
Density
1.15 g/cm3
Elastic modulusus
3500 MPa
Tensile yield strength
84 MPa
Vodoabsorption (23°C)
6,50%
Standards
ISO 11357-1/-3, ASTM D3418, ASTM E-831, ISO 75-1/-2, ASTM D648, UL 94, ISO 4589-1/-2, ISO 527-1/-2, ASTM D638, ASTM D732, ISO 604, ASTM D695, ISO 179-1/1eU, ISO 179-1/1eA, ASTM D256, ISO 178, ASTM D790, ISO 2039-2, ASTM D785, ISO 868, ASTM D2240, IEC 60243-1, ASTM D149, IEC 62631-3-1, ASTM D257, ANSI/ESD STM 11.11, IEC 62631-2-1, ASTM D150, ISO 1183-1, ASTM D792, ISO 62, ASTM D570, ISO 7148-2, QTM 55010, QTM 55007
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

Ertalon® 6 XAU+ PA6

Brand: Ertalon
Article: 3009
In stock

Ertalon® 6 XAU+ PA6 – Ertalon® 6 XAU+ PA6 – heat-stabilized grade polyamideu with very shchilnoiu krystalichnoiu strukturoiu. Porivniano with ordinary extruded or cast PA6 demonstrates higher heat resistance and improved mechanical properties at elevated temperatures.

Plastic shape:
Starting price from
/m²
Please note. The indicated price is per 1 m² of material. The actual cost depends on the selected plastic shape (sheet, rod or tube), dimensions/sizes and product cutting. After the parameters are specified, we will make an accurate calculation and confirm price in commercial offer.

Key parameters of plastic

Product form Rod, Sheet, Tube
Scope of application Elevators, Industry, Production, Transport sphere
Material Polyamide PA6
Temperature range From -30 to +105 °С
Product form Rod, Sheet, Tube
Scope of application Elevators, Industry, Production, Transport sphere
Material Polyamide PA6
Temperature range From -30 to +105 °С

Ertalon® 6 XAU+ PA6 — heat-stabilized cast polyamide 6 increased temperature resistance. Thanks to very dense krystalichnii structure and heat stabilizers material retains mechanical strength and heometrychni sizes at long-term vplyvi elevated temperatur — to 105 °C in continuous mode. Porivniano with ordinary extruded or cast PA6 demonstrates significantly lower creep and higher resistance deshapevanniu at nahrivanni.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Black
Material type
PA6 (Polyamide 6), cast heat-stabilized
Temperature range
From -30 to +105 °C
Density
1.15 g/cm3
Elastic modulusus
3500 MPa
Tensile yield strength
84 MPa
Vodoabsorption (23°C)
6,50%
Standards
ISO 11357-1/-3, ASTM D3418, ASTM E-831, ISO 75-1/-2, ASTM D648, UL 94, ISO 4589-1/-2, ISO 527-1/-2, ASTM D638, ASTM D732, ISO 604, ASTM D695, ISO 179-1/1eU, ISO 179-1/1eA, ASTM D256, ISO 178, ASTM D790, ISO 2039-2, ASTM D785, ISO 868, ASTM D2240, IEC 60243-1, ASTM D149, IEC 62631-3-1, ASTM D257, ANSI/ESD STM 11.11, IEC 62631-2-1, ASTM D150, ISO 1183-1, ASTM D792, ISO 62, ASTM D570, ISO 7148-2, QTM 55010, QTM 55007
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

Related content

dsc_0154

TIVAR® TECH UHMW-PE

TIVAR® TECH – TIVAR® TECH – UHMW-PE with molybdenum disulfide (MoS2) for self-lubrication. Combines exceptional wear resistance PE 1000 with trybolohichnymy advantages MoS2 for grain elevators, agriculture and heavy industry.
More details
screenshot_4

TIVAR® ASTL FG UHMW-PE

TIVAR® ASTL FG UHMW-PE – TIVAR® ASTL FG UHMW-PE – spetsializovanyi UHMW-PE for severe anti-abrasion applications. Combines extremely high molekuliarnu masu with exclusivelyiu wear resistance and antistatic properties for food and industrial use.
More details
dsc_0148-e1599738897627

TIVAR® 1000 FG colors UHMW-PE

TIVAR® 1000 – food-grade ultra-high-molecular-weight polyethylene (UHMW-PE), available in various colors for visual identification zon or products on production. Material meets the requirements of U.S. Food and Drug Administration and EU 10/2011 for food contact, poiednuiuchy high wear resistance, low coefficient of friction, chemical resistance and good machinability.
More details
dsc_0151

TIVAR® Ceram P® UHMW-PE

TIVAR® Ceram P® UHMW-PE – TIVAR® Ceram P® UHMW-PE with ceramic microparticles for increased wear resistance. Thanks to vykliuchnii mezhi strength successfully is used in woodworking, mining and heavy industry.
More details
screenshot_4

TIVAR® FG UHMW-PE

TIVAR® Cestidur – TIVAR® Cestidur – modified UHMW-PE with extremely high molecular weight. Combines unique mechanical properties with increasedu wear resistance for vazhkykh industrial and grain elevator applications.
More details
dsc_0177

TIVAR® DrySlide UHMW-PE

TIVAR® DrySlide – TIVAR® DrySlide – UHMW-PE with osoblyvymy lubricating additives. Maie lowest coefficient of friction among all products TIVAR, that provides smooth sliding bez additional lubrication in industrial applications.
More details

TIVAR® ECO UHMW-PE

TIVAR® ECO UHMW-PE – TIVAR® ECO UHMW-PE – eco-friendly UHMW-PE, partly made from recycled polymer. Proponuie balance mizh acceptable mekhanichnymy properties and vidpovidalnym pidkhodom to environmental protection.
More details
photo_2020-06-12_10-38-34-e1599739276340

TIVAR® H.O.T. UHMW-PE

TIVAR® H.O.T. – TIVAR® H.O.T. (High Operating Temperature) – UHMW-PE, that retains key properties in extended temperature range to +135C. Ideal for hot industrial processes in food and elevatornii sectors.
More details
dsc_0155

PE 500 HMW-PE

PE 500 HMW-PE – PE 500 HMW-PE – high-molecular-weight polyethylene with amongnoiu molecular weight 500 000 g/mol. Lehko pidgivestsia machining, stiikyi to chemicals and widely is used in food, silskohospodarskii and industrial sectors.
More details
dsc_0161-1

TIVAR® 1000 FG UHMW-PE

TIVAR® 1000 FG UHMW-PE – food-grade UHMW-PE with high wear resistance, low coefficient of friction and excellent anti-adhesive properties. Material meets the requirements of food industry and provides long service life parts in sliding units i product conveying.
More details
dsc_0101

Nylatron® 703XL PA6

Nylatron® 703XL PA6 – Nylatron® 703XL PA6 – vysokoproduktyvnyi nylon 6 with excellent wear resistance, that exceeds performance values Nylatron® NSM. Combines excellent tribological characteristics with mekhanichnoiu mitsnistiu for naivybahlyvishykh industrial applications.
More details
dsc_0133

Nylatron® GS PA66

Nylatron® GS PA66 – Nylatron® GS PA66 – polyamide PA66 with additive MoS2, that provides pidvyshchenu stiffness, strength and dimensional stability. Pidkhodyt for aviabuduvannia, railway transport and vidpovidalnykh industrial parts.
More details
dsc_0166

Nylatron® 66 SA FR

Nylatron® 66 SA FR – Nylatron® 66 SA FR – flame-resistant polyamide PA66, developed for applications with elevated requirements to fire safety. Vidpovigives flammability standards and widely is used in railway sector and production.
More details
dsc_0104

Ertalon® 66SA PA66

Ertalon® 66SA PA66 – Ertalon® 66SA PA66 – polyamide PA66 with pobetternymy properties strength, stiffness, termoresistance and oporu wear compared with Ertalon® 6SA. Chudovo suitable for parts, that operate at elevated temperatures.
More details
dsc_0171

Nylatron® FST PA66

Nylatron® FST PA66 – Nylatron® FST PA66 – designed for aircraft interior trim and inshykh applications with requirements to fire, smoke and toxicity (FST). Vidpovigives aviation material safety standards.
More details
dsc_0136

Nylatron® NSM PA6

Nylatron® NSM PA6 – Nylatron® NSM PA6 – polyamide PA6 with tverdymy lubricating additives NSM, that makes material samozmashchuvalnym. Znachno reduces friction and increases wear resistance, is ideal for moving parts without external lubrication.
More details
dsc_0176

Nylatron® MC901 PA6

Nylatron® MC901 PA6 – Nylatron® MC901 PA6 – cast nylon 6 distinctive bright blue color. Thanks to vidminnym pokaznykam density, vtomnoi strength and hnuchkosti ie an optimal choice for production gears, bushings and parts grain elevator equipment.
More details
screenshot_3

Ertalon® LFX PA6

Ertalon® LFX PA6 – Ertalon® LFX PA6 – self-lubricating cast nylon for parts with highy loadmy and obmezhenym zovnishnim lubricationm. Combines chudovu wear resistance with excellent mekhanichnymy properties at long-term operation.
More details
dsc_0103

Ertalon® 6SA PA6

Ertalon® 6SA PA6 – Ertalon® 6SA PA6 – polyamide PA6 with exceptionally zbalanceovanym combinationm mechanical strength, stiffness, damping and wear resistance. Dobre pidgivestsia machining and widely is used in production and transport sector.
More details
dsc_0169

Ertalon® 6PLA FG PA6

Ertalon® 6PLA FG PA6 – Ertalon® 6PLA FG PA6 – modified PA6, characteristics iakoho close to Ertalon® 66SA. Combines strength, stiffness and dimensional stability, ensuring reliable operation in wide rangei industrial conditions.
More details
Calculation and consultation on plastic
We will help you choose plastic, calculate the dimensions and conditions for your project