Chemically inert
Resistant to moisture, chemicals and aggressive environments. Suitable for use in the food industry.
Repair and restoration of screw spirals with TEKRONE® material
Cost calculation of a screw made of Tekrone® engineering plastic
Calculate the approximate cost of manufacturing a screw using Tekrone® engineering plastic. Specify the main parameters of the screw, and the system will automatically generate a preliminary calculation for your product.
Send us your metal auger and we will restore its working spiral.
You can send us your metal auger and we will fabricate a protective spiral from TEKRONE or Polyurethane and install it. Once the work is completed, we will send the finished auger back, fully operational. TEKRONE and Polyurethane are engineering plastics that are highly wear-resistant and have a long service life in conveying equipment.
Are you planning to install it yourself? Send us your measurements and we will make a spiral according to your parameters What measurements are needed:
- outer diameter of the screw
- shaft diameter
- spiral pitch
- winding direction
- total length of the spiral
Step 1
You send us your metal auger
Step 2
We take measurements, coordinate materials and calculations
Step 3
Making a spiral
Step 4
We install it on your auger
Step 5
We check and send the finished product back
Are you planning to install it yourself? Send us your measurements and we will make a spiral according to your parameters What measurements are needed:
- outer diameter of the screw
- shaft diameter
- spiral pitch
- winding direction
- total length of the spiral
Do you have a recovery auger?
Contact us Key properties of Tekrone plastic
Anti-adhesive
Minimizes material sticking to the surface even in difficult working conditions.
Operating temperature -250°C ... +80°C
Maintains stable properties over a wide temperature range.
Shockproof
Withstands shock and mechanical loads during operation.
Electrical insulator
It has high electrical insulation properties for stable operation of equipment.
Antistatic
Reduces the accumulation of static electricity during system operation.
Advantages of Tekrone coils
High auger performance
Due to the very low coefficient of friction, it is possible to reduce the gap between the auger blade and the conveyor body to almost zero. This eliminates the possibility of cargo slipping.
Excellent wear resistance and durability
The high wear resistance of TECRON® significantly extends the service life of the screw spiral and the conveyor as a whole. It reduces repair costs and downtime losses.
Careful handling of cargo
Due to the plastic properties of the material and the practically zero gap with the body, product injury is reduced. This is also facilitated by the absence of sharp edges of the pen due to the absence of this type of wear.
Excellent resistance to aggressive environments
Chemical resistance allows the use of screws in almost all areas of industry. This is also facilitated by a wide range of operating temperatures, antistatic properties. The material can be used in the food industry.
Need advice on Tekrone® coil?
We will help you choose a Tekrone® spiral to match the parameters of your auger and advise you on manufacturing.
Our works
Our work on the manufacture and restoration of Tekrone® spirals for augers for various purposes.
