tiktok-1 tiktok-1-1 tiktok-1-2
0
Opening hours:
Mon–Fri, 09:00–17:00
Call us:
+38(067)55-02-555
0
TIVAR® SuperPlus UHMW-PE
dsc_0150

TIVAR® SuperPlus — UHMW-PE with maximum degree of polymerization among line TIVAR®, that provides the highest wear resistance. Thanks to extremely dovhym polimernym lantsiuham material demonstrates significantly lower abtimesvnyi wear, than standard PE 1000, at retaining kharakternoi for UHMW-PE udarnoi strength and antyadhezii.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Gray
Material type
UHMW-PE optimized for wear
Temperature range
From -150 to +80 °C
Density
0.95 g/cm3
Wear resistance
Increased
Standards
ISO 11357-1, ISO 11357-3, ASTM D3418, ASTM E-831, ISO 75-1, ISO 75-2, ASTM D648, UL 94, ISO 4589-1, ISO 4589-2, ISO 527-1, ISO 527-2, ASTM D638, ASTM D732, ISO 604, ASTM D695, ISO 179-1/1eU, ISO 179-1/1eA, ISO 21304-2, ASTM D256, ASTM D4020, ISO 178, ASTM D790, ISO 15527, ISO 868, ASTM D2240, IEC 60243-1, ASTM D149, IEC 62631-3-1, ASTM D257, ANSI/ESD STM 11.11, IEC 62631-2-1, ASTM D150, ISO 1183-1, ASTM D792, ISO 62, ASTM D570, ISO 7148-2, QTM 55010, QTM 55007
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

TIVAR® SuperPlus UHMW-PE

Brand: TIVAR
Article: 3033
In stock

TIVAR® SuperPlus – TIVAR® SuperPlus – wear-optimized UHMW-PE with extremely high degree of polymerization. Zabezpechuie vykliuchnu wear resistance for the most demanding applications in printing and industrial sectors.

Plastic shape:
Starting price from
/m²
Please note. The indicated price is per 1 m² of material. The actual cost depends on the selected plastic shape (sheet, rod or tube), dimensions/sizes and product cutting. After the parameters are specified, we will make an accurate calculation and confirm price in commercial offer.

Key parameters of plastic

Product form Sheet
Scope of application Typographies
Material Polyethylene UHMW-PE
Temperature range From -150 to +80 ­°С
Product form Sheet
Scope of application Typographies
Material Polyethylene UHMW-PE
Temperature range From -150 to +80 ­°С

TIVAR® SuperPlus — UHMW-PE with maximum degree of polymerization among line TIVAR®, that provides the highest wear resistance. Thanks to extremely dovhym polimernym lantsiuham material demonstrates significantly lower abtimesvnyi wear, than standard PE 1000, at retaining kharakternoi for UHMW-PE udarnoi strength and antyadhezii.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Gray
Material type
UHMW-PE optimized for wear
Temperature range
From -150 to +80 °C
Density
0.95 g/cm3
Wear resistance
Increased
Standards
ISO 11357-1, ISO 11357-3, ASTM D3418, ASTM E-831, ISO 75-1, ISO 75-2, ASTM D648, UL 94, ISO 4589-1, ISO 4589-2, ISO 527-1, ISO 527-2, ASTM D638, ASTM D732, ISO 604, ASTM D695, ISO 179-1/1eU, ISO 179-1/1eA, ISO 21304-2, ASTM D256, ASTM D4020, ISO 178, ASTM D790, ISO 15527, ISO 868, ASTM D2240, IEC 60243-1, ASTM D149, IEC 62631-3-1, ASTM D257, ANSI/ESD STM 11.11, IEC 62631-2-1, ASTM D150, ISO 1183-1, ASTM D792, ISO 62, ASTM D570, ISO 7148-2, QTM 55010, QTM 55007
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.
Calculation and consultation on plastic
We will help you choose plastic, calculate the dimensions and conditions for your project