tiktok-1 tiktok-1-1 tiktok-1-2
0
Opening hours:
Mon–Fri, 09:00–17:00
Call us:
+38(067)55-02-555
0
Ertalyte® TX FG PET-P
photo_2020-06-10_17-17-11-e1599739807675

Ertalyte® TX PET — PET with vbudovanym lubricantm (TX = Tribologically eXtended), that significantly pobetterie tribological characteristics material at retaining vsikh perevah base Ertalyte® PET. Coefficient of friction TX significantly lower, a wear resistance — higher, than in nenapovnenoho PET, that allows zastosovuvaty material in sliding units without external lubrication.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Natural / Black / Blue
Material type
PET with internal lubricant
Filler
Internal lubricating component
Density
1.44 g/cm3
Elastic modulusus
3300 MPa
Tensile yield strength
76 MPa
Vodoabsorption (23°C)
0,47 %
Standards
ISO 1183
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

Ertalyte® TX FG PET-P

Brand: Ertalyte
Article: 3040
In stock

Ertalyte® TX PET – Ertalyte® TX – thermoplastic polyester PET with internal lubricant for improved wear resistance and khimichnoi inertnosti. Ideal for bearings and sliding parts, that operate without external lubrication.

Plastic shape:
Starting price from
/m²
Please note. The indicated price is per 1 m² of material. The actual cost depends on the selected plastic shape (sheet, rod or tube), dimensions/sizes and product cutting. After the parameters are specified, we will make an accurate calculation and confirm price in commercial offer.

Key parameters of plastic

Product form Rod, Sheet, Tube
Scope of application Conveyor systems, Food industry, mechanical engineering, Packaging equipment
Material Polyethylene terephthalate PET
Temperature range From -20 to +100 °С
Product form Rod, Sheet, Tube
Scope of application Conveyor systems, Food industry, mechanical engineering, Packaging equipment
Material Polyethylene terephthalate PET
Temperature range From -20 to +100 °С

Ertalyte® TX PET — PET with vbudovanym lubricantm (TX = Tribologically eXtended), that significantly pobetterie tribological characteristics material at retaining vsikh perevah base Ertalyte® PET. Coefficient of friction TX significantly lower, a wear resistance — higher, than in nenapovnenoho PET, that allows zastosovuvaty material in sliding units without external lubrication.

Vyrobnyk: Mitsubishi Chemical Advanced Materials (MCAM). Ofitsiinyi distributor in Ukraini — IQ Composite.

Color
Natural / Black / Blue
Material type
PET with internal lubricant
Filler
Internal lubricating component
Density
1.44 g/cm3
Elastic modulusus
3300 MPa
Tensile yield strength
76 MPa
Vodoabsorption (23°C)
0,47 %
Standards
ISO 1183
Products by Mitsubishi Chemical Advanced Materials comply with international quality standards. Certificates are available on request.
  • ISO 9001:2015 Quality Management System
  • Material technical specifications
Available in the following shapes, sizes and colors:
Did not find the required size? Contact us and we will advise you.

Related content

dsc_0134

Ketron® HPV PEEK

Ketron® HPV PEEK – Ketron® HPV PEEK – PEEK з вбудованими мастилами (графіт, ПТФЕ, вуглець) для оптимальних трибологічних характеристик. Ідеальний для підшипників і деталей ковзання при підвищених температурах без зовнішнього змащення.
More details
dsc_0175

Acetron® VMX FG POM-C

Acetron® MD POM-C – Acetron® MD – acetal copolymer POM-C with metal-detectable additive. Especially useful for checking contamination in food and packaging sectors. Demonstruie excellent strength, stiffness and wear resistance. Zatverdzhenyi FDA and 2002/72/EC.
More details

Ertacetal® C POM-C

Ertacetal® C POM-C – Ertacetal® C – standard acetal copolymer POM-C. Yak in naturalnomu, tak and in other colors complies with standards FDA for food contact. Combines excellent dimensional stability with easeiu machining.
More details
photo_2020-06-10_17-17-09-e1599739721214

Ertalyte® PET

Ertalyte® PET – Ertalyte® PET – unreinforced, semi-crystalline thermoplastic based on polyethylene terephthalate. Kharakteryzuietsia excellent dimensional stability, chemical resistance and wear resistance for precision parts with tight tolerances.
More details
dsc_0143

Ketron® 1000 PEEK

Ketron® 1000 PEEK – Ketron® 1000 PEEK – provides the highest strength and impact toughness among all grades Ketron. Dostupnyi in natural and black colors for the most demanding applications at extreme temperatures and chemical load.
More details
dsc_0140-1

Ketron® CA30 PEEK

Ketron® CA30 PEEK – Ketron® CA30 PEEK – PEEK reinforced with 30% carbon fibers. Zabezpechuie vykliuchnu stiffness, heat resistance and chemical inertness. Ideal material for labyrinth seals compressors and parts aerospace industry.
More details
photo_2020-06-10_17-16-55-e1599739206909

Ketron® GF30 PEEK

Ketron® GF30 PEEK – Ketron® GF30 PEEK – PEEK reinforced with 30% glass fiber. Combines exceptional heat resistance PEEK with improved stiffness and dimensional stability for precision parts in extreme conditions.
More details
screenshot_4

TIVAR® ASTL FG UHMW-PE

TIVAR® ASTL FG UHMW-PE – TIVAR® ASTL FG UHMW-PE – spetsializovanyi UHMW-PE for severe anti-abrasion applications. Combines extremely high molekuliarnu masu with exclusivelyiu wear resistance and antistatic properties for food and industrial use.
More details
dsc_0148-e1599738897627

TIVAR® 1000 FG colors UHMW-PE

TIVAR® 1000 – food-grade ultra-high-molecular-weight polyethylene (UHMW-PE), available in various colors for visual identification zon or products on production. Material meets the requirements of U.S. Food and Drug Administration and EU 10/2011 for food contact, poiednuiuchy high wear resistance, low coefficient of friction, chemical resistance and good machinability.
More details
screenshot_4

TIVAR® FG UHMW-PE

TIVAR® Cestidur – TIVAR® Cestidur – modified UHMW-PE with extremely high molecular weight. Combines unique mechanical properties with increasedu wear resistance for vazhkykh industrial and grain elevator applications.
More details

TIVAR® ECO confetti fine black antistatic UHMW-PE

TIVAR® ECO antistatic – TIVAR® ECO antistatic – eco-friendly UHMW-PE with antistatic properties. Vyhotovlenyi partly from recycled material, poiednuiuchy responsible approach to environment with functional characteristics for industrial use.
More details

TIVAR® ECO UHMW-PE

TIVAR® ECO UHMW-PE – TIVAR® ECO UHMW-PE – eco-friendly UHMW-PE, partly made from recycled polymer. Proponuie balance mizh acceptable mekhanichnymy properties and vidpovidalnym pidkhodom to environmental protection.
More details
photo_2020-06-12_10-38-34-e1599739276340

TIVAR® H.O.T. UHMW-PE

TIVAR® H.O.T. – TIVAR® H.O.T. (High Operating Temperature) – UHMW-PE, that retains key properties in extended temperature range to +135C. Ideal for hot industrial processes in food and elevatornii sectors.
More details
photo_2020-06-11_13-50-34-e1599739512336

TIVAR® VMX FG UHMW-PE

TIVAR® MD UHMW-PE – TIVAR® MD UHMW-PE – UHMW-PE with metal-detectable additives for food industry. Spetsialno developed for production lines, where detection foreign fragments ie a mandatory product safety requirement.
More details
dsc_0155

PE 500 HMW-PE

PE 500 HMW-PE – PE 500 HMW-PE – high-molecular-weight polyethylene with amongnoiu molecular weight 500 000 g/mol. Lehko pidgivestsia machining, stiikyi to chemicals and widely is used in food, silskohospodarskii and industrial sectors.
More details
dsc_0161-1

TIVAR® 1000 FG UHMW-PE

TIVAR® 1000 FG UHMW-PE – food-grade UHMW-PE with high wear resistance, low coefficient of friction and excellent anti-adhesive properties. Material meets the requirements of food industry and provides long service life parts in sliding units i product conveying.
More details
dsc_0136

Nylatron® NSM PA6

Nylatron® NSM PA6 – Nylatron® NSM PA6 – polyamide PA6 with tverdymy lubricating additives NSM, that makes material samozmashchuvalnym. Znachno reduces friction and increases wear resistance, is ideal for moving parts without external lubrication.
More details
screenshot_4

Nylatron® GSM PA6

Nylatron® GSM PA6 – Nylatron® GSM PA6 – polyamide PA6 with additive molybdenum disulfide (MoS2). Zabezpechuie improved oporni properties and wear resistance bez significant change mekhanichnykh characteristics compared withi standard PA6.
More details
dsc_0172

Nylatron® SLG PA6

Nylatron® SLG PA6 – Nylatron® SLG PA6 – specially developed for unlubricated, highly loaded and slow-moving parts. Thanks to unique composition provides lower costs on maintenance and longer service life compared with standard cast nylonamy.
More details
Calculation and consultation on plastic
We will help you choose plastic, calculate the dimensions and conditions for your project